操作窗口对排风柜污染物控制效果影响的实验研究

为提升排风柜的控污能力,在排风柜性能测试实验台上,采用示踪气体测试法和正交试验法,研究了操作窗口竖直开度、水平开度、面风速和操作窗口位置对排风柜前呼吸区污染物控制效果的影响。极差分析和方差分析结果表明:各因素对呼吸区污染物控制效果影响的强弱顺序依次为竖直开度、水平开度、面风速、操作窗口位置;操作窗口水平开度、竖直开度增大,排风柜对呼吸区的污染物控制效果减弱;面风速增大,控制效果增强;水平开度与竖直开度对控制浓度的影响存在较大的相关性,这2个因素对控制浓度的影响仅在另一因素达到一定水平后才能体现。     

脉冲电磁处理参数对YT15硬质合金服役寿命的影响

采用COMSOL Multiphysics有限元分析软件对脉冲电磁处理设备进行仿真建模,利用正交试验的方法研究了磁通密度、磁脉冲个数、脉冲电压、电脉冲组数对YT15硬质合金刀具服役寿命的影响规律。通过极差分析得到了各因素的影响主次关系以及最佳脉冲电磁处理参数,并分析了切削过程的主切削力及磨损量变化,结果表明:脉冲电磁处理可使YT15硬质合金刀具服役寿命增长57.2%;最佳的处理参数组合为磁通密度2T,磁脉冲个数10,脉冲电压0.8V,电脉冲组数20;磁通密度和磁脉冲个数对其寿命影响较大,脉冲电压和电脉冲组数影响较弱;脉冲电磁处理后的刀具切削力较未处理有所降低,后刀面磨损速度明显减缓。     

Development of docetaxel nanocapsules for improving in vitro cytotoxicity and cellular uptake in MCF-7 cells

The aim of this study was to fabricate docetaxel loaded nanocapsules (DTX-NCs) with a high payload using Layer-by-Layer (LbL) technique by successive coating with alternate layers of oppositely charged polyelectrolytes. Developed nanocapsules (NCs) were characterized in terms of morphology, particle size distribution, zeta potential (ζ-potential), entrapment efficiency and in vitro release. The morphological characteristics of the NCs were assessed using transmission electron microscopy (TEM) that revealed coating of polyelectrolytes around the surface of particles. The developed NCs successfully attained a submicron particle size while the ζ-potential of optimized NCs alternated between (+) 34.64?±?1.5 mV to (?) 33.25?±?2.1 mV with each coating step. The non-hemolytic potential of the NCs indicated the suitability of the developed formulation for intravenous administration. A comparative study indicated that the cytotoxicity of positively charged NCs (F4) was significant higher (p?in vitro on MCF-7 cells. Furthermore, cell uptake studies evidenced a higher uptake of positive NCs (≥1.2 fold) in comparison to negative NCs. In conclusion, formulated NCs are an ideal vehicle for passive targeting of drugs to tumor cells that may result in improved efficacy and reduced toxicity of encapsulated drug moiety.     

Voltage Assisted Control of Spin-Transfer Nano-Oscillators

The spin-transfer nano-oscillator(STNO) has recently acquired a huge amount of research interest, due to its promising easy tunability along with the miniature size. The output frequency control of an STNO through magnetic field and current has been examined almost to its full extent; however, there are issues that still need to be addressed. Here, we propose a novel way of voltage control of the output frequency of an STNO, and alongside reducing its power requirement.     

天然土壤胶体对U(Ⅵ)迁移的影响

以石英砂为填充介质，采用动态柱实验方法研究了某中低放处置场地表土壤胶体对U(Ⅵ)在石英砂柱中迁移行为的影响，并结合静态批式实验探究了土壤胶体对U(Ⅵ)迁移的影响机制。结果表明，当U(Ⅵ)进样质量浓度从1.0 mg/L增大至5.0 mg/L时，U(Ⅵ)在石英砂柱中的穿透速率显著增大，且达到洗脱平衡时所需淋洗液的体积从250 PVs（孔隙体积）增大至400 PVs。与U(Ⅵ)相比，土壤胶体在石英砂柱内迁移较快，这可能是由于土壤胶体与石英砂之间相互作用较弱所致。土壤胶体与U(Ⅵ)共存体系中，U(Ⅵ)的迁移速率明显增大，而土壤胶体迁移速率无显著变化，表明共存体系中U(Ⅵ)的迁移行为主要受土壤胶体所控制。静态吸附实验表明，在石英砂-U(Ⅵ)二元体系中，pH≈6.0时石英砂对U(Ⅵ)的吸附率最大，而在胶体-石英砂-U(Ⅵ)三元体系中，U(Ⅵ)主要在土壤胶体表面发生吸附。本研究所用土壤中胶体的质量分数仅约占0.04%，但可吸附20%U(Ⅵ)（初始质量浓度为5.0 mg/L）；由此可见，土壤胶体可与U(Ⅵ)发生强的相互作用，进而对U(Ⅵ)在真实环境体系中的吸附、迁移和扩散等行为产生至关重要的影响。     

Binary Ti–Fe system. Part I: Experimental investigation at high pressure

The present work illustrates the effect of quasi-hydrostatic pressure on the positions and widths of the homogeneity ranges of the intermetallic phases TiFe and TiFe₂ at high temperatures. The experiments were performed with Ti–Fe diffusion couples that were heat treated in a multi-anvil press at 2.5 GPa. The solubility limits of the phases were derived from the concentration profiles that were measured using electron probe microanalysis. It was found that the homogeneity ranges of TiFe and TiFe₂ extend to higher titanium concentrations, if the pressure is applied. The positions of the phase boundaries of the intermetallics on the iron-rich side are not affected by the pressure. The accuracy of the experimental data including the homogeneity ranges and temperatures was verified by comparing the homogeneity ranges of β-Ti(Fe), α/δ-Fe(Ti) and γ-Fe measured in this study with the homogeneity ranges taken from literature. The pressure was calibrated using the pressure-induced phase transitions of bismuth.     

Modelling consumer choice through the random regret minimization model: An application in the food domain

In line with findings on post-purchase food-choice regret, one can expect that pre-purchase anticipated regret with respect to forgone (non-chosen) alternatives has an impact on consumer food choices, especially when the choice is considered to be important. The traditional Random Utility Maximization (RUM) models for discrete choices may not fully capture this impact. This study investigates the usefulness and potential in the food domain of a discrete choice model that follows the regret minimization principle, the Random Regret Minimization (RRM) model, as an alternative and complement to existing RUM models. The two models are applied to consumer stated choices of cheese in a choice experiment. The study also investigates whether and to what extent a number of personality traits determine whether particular consumers rather choose according to utility-maximization, or regret-minimization principles. Results show that at the aggregate level the two models have a similar goodness of fit to the data and prediction ability. Still, each of them shows better fit for particular subgroups of consumers, based on personality traits. Hence, the present study reveals a potential for the RRM model applications in the food domain, and adds to the empirical literature supporting previous findings on the RRM model found in other contexts. Further research is needed to explore in which situations and for which consumer segments the RRM model is the most useful model.     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

Survey on Passivity Based Control of Induction Machine

Induction machines (IM) constitute a theoretically interesting and practically important class of nonlinear systems. They are frequently used as wind generators for their power/cost ratio. They are described by a fifth‐order nonlinear differential equation with two inputs and only three state variables available for measurement. The control task is further complicated by the fact that IM are subject to unknown (load) disturbances and the parameters can be of great uncertainty. One is then faced with the challenging problem of controlling a highly nonlinear system, with unknown time‐varying parameters, where the regulated output, besides being unmeasurable, is perturbed by an unknown additive signal. Passivity‐based control (PBC) is a well‐established structure‐preserving design methodology which has shown to be very powerful to design robust controllers for physical systems described by Euler‐Lagrange equations of motion. PBCs provide a natural procedure to "shape" the potential energy yielding controllers with a clear physical interpretation in terms of interconnection of the system with its environment and are robust vis á vis to unmodeled dissipative effects. One recent approach of PBC is the Interconnection and Damping Assignment Passivity‐Based Control (IDA‐PBC) which is a very useful technique to control nonlinear systems assigning a desired (Port‐Controlled Hamiltonian) structure to the closed‐loop. The aim of this paper is to give a survey on different PBC of IM. The originality of this work is that the author proves that the well known field oriented control of IM is a particular case of the IDA‐PBC with disturbance.